Fort Myers, Fla. January 9, 2012 – Fox Electronics, a
leading global supplier of frequency control solutions, recently released a
new TCXO in a compact 2.5 mm x 2.0 mm x 1.0 mm package making them ideal for
GPS applications.
The new
FOX922-GP Series oscillators are available
in six supply voltage options ranging from 1.8 V to 3.3 V (±5% standard) for
increased adaptability to any platform. Offering a tight stability of up to
±0.5 ppm across a vast operating temperature range of -30°C to +85°C, the
RoHS-complaint SMD (surface mount device) oscillators with a gold
termination finish are best suited for portable applications requiring
precision timing.
Standard frequencies for the new TCXO oscillators range from 16.367667 MHz
to 38.400 MHz with ten varieties offered. Available with a clipped sine
output waveform, the peak-to-peak voltage level is 0.8 V minimum. Phase
noise at 16.369 MHz with 10 kHz offset is typically -147 dBc/Hz. Output load
is (10kΩ//10pF)±10%.
Frequency stability over the supply voltage change is ±0.2 ppm and over the
load change is ±0.2 ppm. Aging per year is only ±1.0 ppm. Initial frequency
tolerance at 25°C after two reflows is ±2.0 ppm. Moisture sensitivity level
(MSL) is 1. Storage temperature range is -40°C to +85°C. Reflow soldering
temperature is 260°C/10 seconds.
 Fort
Myers, Fla. November 14, 2011 - Fox Electronics, a leading global
supplier of frequency control solutions, now offers its
XpressO
XO oscillators with an extremely
tight frequency stability to ±25 ppm over the operating
temperature range of -20°C to +70°C in a miniature 3.2 mm x 2.5 mm package.
The new HCMOS 3.3 V
FXO-HC336 is part of Fox's full line of
low-cost, high performance XpressO oscillators that are delivered within 10
days and offer extremely low jitter.
Fox's new oscillator is ideal for use in a variety of applications,
including microprocessor, DSP, FPGA, SONET and Ethernet environments as well
as industrial controllers, test and measurement equipment, storage area
networks and other applications that require the oscillator to maintain its
frequency over a wide temperature range in a compact, cost-effective
package.
The RoHS- and REACH-compliant
FXO-HC33 family of crystal oscillators are
available in any frequency from 0.75 MHz to 250 MHz and offer a frequency
resolution to six decimal places. Additional options are also available for
the FXO-HC33 product family.
A breakthrough in configurable frequency control solutions, XpressO crystal
oscillators utilize a family of proprietary application specific integrated
circuits (ASICs), designed and developed by Fox with a focus on noise
reduction. These ASICs have the ability to enable users to select the
optimum combination of output type, input voltages and temperature
performance features.
The oscillators feature a tri-state enable/disable feature that allows the
user to turn off the output as a way to reduce power consumption. The
contacts of the FXO-HC33 series contacts are constructed with a gold over
nickel termination finish and incorporate industry standard packaging,
including footprint and pin-out.
XpressO oscillators have reduced noise levels comparable to traditional bulk
quartz and SAW oscillators by using the third order Delta Sigma Modulator
(DSM). The low cost oscillators also offer extremely low jitter of less than
1 pS.
Samples are available in one to two days, with production quantities within
ten working days. The oscillators come standard with Fox's patented serial
identification system that ensures exceptional quality control and unique
traceability of each individual part throughout the entire manufacturing
process.
 Fort
Myers, Fla. October 1, 2011 – Fox Electronics, a leading global supplier
of frequency control solutions, now offers the
F300 series of HCMOS oscillators which
feature low voltage and low current consumption. The 1-volt oscillators
incorporate a standby function that reduces the oscillator’s current
consumption to 5 micro amps for more efficient power usage.
Available in a compact 3.2 mm x 2.5 mm package, the small form factor F300
series includes models with stabilities ranging from ±20 ppm to ±100 ppm.
The new oscillators offer an extremely low current draw of 2.5 mA across the
1.8 MHz to 32.0 MHz frequency range and 3.5 mA from 32.1 MHz to 50.0 MHz.
Fox’s new series of RoHS-compliant oscillators are ideal for use in
environments with minimal air circulation, such as compact consumer
electronics and weather-proof enclosures. Portable and battery-powered
devices, including satellite and terrestrial radio; WiMax, 802.11 and
Bluetooth wireless; wired and optical networks for voice, data and Internet
as well as automotive and test equipment; remote sensing equipment; and GPS
technology are also ideal applications for the F300 oscillators.
Models with stabilities from ±20 ppm to ±100 ppm can operate in temperatures
ranging from -10°C to +70°C while models with stabilities from ±25 ppm to
±100 ppm operate in an extended temperature range of -40°C to +85°C. Storage
temperature range is -55°C to +125°C.
Start up time is 5 mS. The F300 series contacts feature a gold finish and
the moisture sensitivity level (MSL) is 1.
Fox Electronics Adds New Sales Office in Silicon Valley
Peter Sedlak Hired as Western Regional Area Engineering Sales Manager
Fort Myers, Fla. October 9, 2011 – Fox Electronics, a leading global
supplier of frequency control solutions, recently reorganized its North
American sales territories into three regions (East, Central and West) and
has named Peter Sedlak to manage the west region from the new sales office
in Silicon Valley. The expansion comes as Fox is experiencing increased
demand for its products across all North America and follows the
introduction of Fox Electronics Canada earlier in 2011.
All the engineering sales managers will be focused on building and
sustaining relationships with Fox’s current and future customers as well as
designing in Fox’s patented XpressO oscillators into strategic key accounts.
After realigning the North American territory, Roger Burns will now manage
the newly created central territory, while David Meaney will continue to
manage the east territory.
“The year 2011 has been remarkable in terms of company expansion,” noted
E.L. Fox, president of Fox Electronics. “Not only do we have new territories
across North America, but we also recently shipped the 18 millionth XpressO
oscillator. The continued demand for this unique product has given Fox the
opportunity to provide our products and services to an expanding global
customer base.”
Sedlak comes to Fox with over 30 years of experience selling frequency
control products. His expertise will be used to manage distributor
relationships, network with manufacturer representatives and promote the
company’s continued expansion and success in his territory.
“Sedlak’s skills as a sales manager and familiarity with the industry will
be a great asset to the company. We’re confident that adding him to our team
of engineering sales managers will allow us to provide an even higher level
of quality service, support and products that our customers have come to
expect from Fox,” said Fox.
Before joining Fox, Sedlak most recently worked for Precision Devices, Inc.
as the western regional manager responsible for managing key corporate
accounts, developing new customers and continuing company growth. Sedlak
studied business administration at Western Nevada College and electronic
engineering at De Anza Community College.
Fox’s new sales office is located at 6194 Chesbro Ave, San Jose, CA 95123.
Sedlak can be reached at Tel: 408-499-7526; email:
Peter.Sedlak@foxonline.com .
 Hong Kong ,
August 1st, 2011 -
Fox Electronics Asia Ltd., a leading global supplier of frequency control
solutions, has expanded the engineering, sales support and logistics support
it delivers to its customers throughout the region with the opening of its
Asia Pacific Logistics and Customer Service Center in Hong Kong. In 2002,
the company established its regional operations at its former Hong Kong
office location. Fox has also appointed Ms Fiona Y.T. Chan as Operations
Manager. In her new role she will manage the new Center which acts as Fox
Electronics Asia Pacific Headquarters.
Burgeoning-demand for our XpressO® product line, that has revolutionized
configurable frequency control solutions has driven a need to expand all of
our service areas,” said Herb Chaney, Vice President and Managing Director
Fox Electronics Asia Ltd. and Fox Electronics EMEA. "The opening of our new
Center along with Ms. Chan’s promotion and expanded role within the company
will ensure we are ideally placed to support engineers across the region.”
Fox XpressO crystal oscillators are a low jitter, low cost oscillator line
that is available in a wide variety of sizes, standard and custom
frequencies, package types and designs. XpressO oscillators are now
available in application specific configurations.
“Ms Chan has been a valuable asset to Fox Electronics since joining the
company in 2003, she will play a leading role in the long-term direction of
the company by helping to deliver ongoing innovation and value to customers
in the world’s largest electronics market,” said Chaney.
Fort Myers, Fla. March 28, 2011 - Fox Electronics, a leading global
supplier of frequency control solutions, now offers a new series of small
footprint, low current consumption oscillators for small and portable
devices. The
F100 HCMOS oscillator family is available
in 1.8V (F110
series), 2.5V (F140
series) and 3.3V (F130
series) options and a frequency range of 1.0 MHz to 80.0 MHz, all
in a compact 2.0 mm x 1.6 mm footprint with a low 0.8 mm profile.
The compact size of the new F100 oscillators makes them ideal for use in
portable and space-constrained devices, including laptop computers, PDAs,
cell phones, DVD players, MP3 players, video and digital cameras, as well as
MCMCIA cards, Bluetooth, and small rack-mount and portable test equipment.
Featuring a standby function that reduces current consumption to 10 micro
amps, the new Fox oscillators utilize power more efficiently. The F100
oscillators offer stabilities from ±50 ppm and ±100 ppm across an operating
temperature range of -20°C to +70°C and an extended range of -40°C to +85°C.
Stability of ±25 ppm is available over an operating temperature range of
-10°C to +60°C.
About FOX Electronics
For more than 30 years Fox has helped engineers worldwide meet their
toughest frequency control needs. We do it with the world's broadest line of
crystals, fixed and programmable oscillators, TCXOs,. VCXOs...and ultimate
technical support capabilities. From overnight off-the-shelf to custom, Fox
Rocks your frequency control world...throughout the world!
 Fort
Myers, Fla. February 14, 2011 - Fox Electronics, a leading global
supplier of frequency control solutions, announced it has expanded its
worldwide presence with the introduction of Fox Electronics Canada and has
hired Ross O. Weiss as its new Vice President North America Sales. The
expansion is in response to the tremendous growth in demand for its products
that Fox Electronics has seen in the past year.
E.L. Fox, president of Fox Electronics, noted, "Because of the strong
response we have gotten on products like our patented XpressO technology, it
is essential for us to continue our commitment to our customers and increase
our capabilities even farther. Expanding into Canada is vital to servicing
our growing international customer base."
Weiss, who has over 30 years experience in the electronics component
industry, will be responsible for interfacing with manufacturer
representatives, managing key distributor relationships and coordinating
sales engineers throughout North America as well as the promotion of the
company's continued growth and success.
He will also work closely with Fox's engineering department to bring
additional technological advancements, such as the next generation of
XpressO, to market in Canada.
"Ross's vast knowledge of the industry and experience with manufacturing
representatives, distributors and OEM customers will aid in quickly getting
our Canadian operations up and running smoothly to provide quality frequency
control products to this geographic region," said Fox.
Before joining Fox, Weiss worked for the John G. Weiss Company as a Canadian
electronic component manufacturer representative. Over his 33 year career
with the company, he served as inside sales manager, sales manager and
distribution sales manager. For the past 25 years, he was the president and
majority shareholder.
Weiss received his Bachelors of Commerce degree and honors in economics from
Concordia University, formally Loyola College, Montreal, Canada. He also
attended McGill University, Montreal, pursuing a diploma program in
business.
Fox Electronics Canada is located at 19100 Trans-Canada Highway, Baie
D'Urfe,
Quebec, H9X 3S4; tel: 1-888-438-2369, ext. 2261;
email:ross.weiss@foxonline.com .
For more information, please visit (http://www.foxonline.com) or contact
Customer Service, Fox Electronics, 5570 Enterprise Parkway, Fort Myers, Fla.
33905. Tel: 888-GET-2-FOX; Fax: 239-693-1554; E-mail:
http://www.foxonline.com/email.htm ; Web:
www.foxonline.com
.
For high res download and full text:
http://www.simongroup.com/PressRoom/press-release.php?Job=FOX-A-3772
For more news releases:
http://www.simongroup.com/PressRoom/fox.php
Subscribe to Fox's RSS feed. (http://feeds.feedburner.com/FoxElectronics)
Follow us on Twitter: foxelectronics1 (http://twitter.com/foxelectronics1)
 Fort
Myers, Fla. October 4, 2010 - Fox Electronics, a leading global supplier
of frequency control solutions, recently increased its range of watch
crystals with a new tuning fork. The
FX122 is approximately 33% smaller than previous models,
measuring just 2.1 mm x 1.3 mm with a very low profile of 0.6 mm. The
miniature size of the new FX122 watch crystal makes it ideal for portable
and handheld devices where space is critical.
With a frequency of 32.768 kHz, the new surface mount device (SMD) is
optimized for a standard 12.5 pF load capacitance, with an optional load
capacitance of 9 pF available. Frequency tolerance is ±20 PPM at 25°C (77°F)
and frequency stability is -0.04 ppm / (change in C°)2 over the standard
operating temperature of -40°C to +85°C (-40°F to 185°F).
Turnover temperature range is +20°C to +30°C (68°F to 86°F) and storage
temperature is -55°C to +125°C (-67°F to 257°F). Maximum equivalent series
resistance of the new FX122 crystal is 90 k ohm and insulation resistance is
500 megaohm at 100 VDC. Aging is ±3 PPM per year. The termination finish is
gold over nickel.
The new watch crystal is RoHS-compliant and comes standard in a 3,000-unit
tape and reel for automatic assembly systems.
For more information, please visit
http://www.foxonline.com/pdfs/FX122.pdf or contact Customer
Service, Fox Electronics, 5570 Enterprise Parkway, Fort Myers, Fla. 33905.
Tel: 888-GET-2-FOX; Fax: 239-693-1554; E-mail:
http://www.foxonline.com/email.htm ; Web:
www.foxonline.com
.
For an electronic copy, please visit
http://www.simongroup.com/PressRoom/WordDocs/fox/FOX-A-3734.doc
For high res photo, please visit
http://www.simongroup.com/PressRoom/Images/fox/FOX-A-3734.jpg
For additional news releases from Fox Electronics, please visit
http://www.simongroup.com/PressRoom/fox.php
Subscribe to Fox's RSS feed:
http://feeds.feedburner.com/FoxElectronics
Follow us on Twitter:
http://twitter.com/foxelectronics1
# # #
UPCOMING TRADESHOW: Electronica -- November 9 - 12, 2010 Munich, Germany
READER SERVICE INQUIRIES: Please forward all reader service inquiries to
Customer Service, Fox Electronics, 5570 Enterprise Parkway, Fort Myers, Fla.
33905.
EDITOR'S NOTE: Fox Electronics is a leading global supplier of standard and
custom frequency control products, including the industry's broadest line of
crystals, oscillators, VCXOs, TCXOs, OCXOs and crystal filters. The company,
headquartered in Fort Myers, Fla., has facilities, representatives and
distributors throughout the world.
FOX Hong
Kong is Expanding! August 3, 2010
Fox Electronics is happy to announce the relocation and expansion of its
Asia Pacific Headquarters office effective August the 16th, 2010.
Herb Chaney, Vice President and Managing Director
Fox Electronics Asia Ltd., and Fox Electronics EMEA further comments "Our
relocation and subsequent expansion of all service areas has been driven due
to our substantial growth in the region centered around our revolutionary
product family XpressO. With the continued growth and demand of all Fox
Products we will be able to better serve our customers with expanded
Engineering, Sales Support and Logistics Support". Our new office location
will be:
Fox Electronics Asia Ltd.
21/F, Cheong Sun Tower
118 Wing Lok Street
Sheung Wan, Hong Kong
Fox Electronics Asia Ltd., telephone and fax
numbers will remain the same. Our primary number is 852. 2854.4285 and our
fax number is 852.2854.4282.
All other communication data such as email addresses and associates mobile
numbers will remain the same.
 Fort
Myers, Fla. June 21, 2010 - Fox Electronics, a leading global supplier
of frequency control solutions, recently announced a new line of XpressO
oscillators explicitly designed to meet the needs of Gigabit Ethernet (GbE)
and 10 GbE applications. Each model in the new
Application Specific XpressO
line is off-the-shelf, pre-configured to precise application-specific
requirements in an industry standard 7 mm x 5 mm package.
The series is the first to combine Fox's
patented breakthrough
XpressO technology with the specific
characteristics required to meet the demanding needs of 3.3-volt (±5%
standard) Ethernet-specific applications to ensure the best performance
possible without the wait associated with custom products. XpressO
technology offers fast delivery of low jitter, small package size and
multiple frequency and output options at a low cost. Designed and developed
by Fox, XpressO oscillators utilize a family of proprietary application
specific integrated circuits (ASICs) with a key focus on noise reduction.
Fox's new Ethernet specific XO oscillators
offer a frequency stability of ±50 ppm, with tighter stabilities available
upon request and are available in 125.00 MHz, 156.25 MHz and 312.50 MHz
models. HCMOS, LVPECL and LVDS outputs are available on the 125.00 MHz and
156.25 MHz models while LVPECL and LVDS outputs are available on the 312.50
MHz model. The XpressO oscillators offer a tri-state enable/disable feature,
allowing the user to turn the output on and off. Output enable/disable time
is less than 100 nS.
Each XpressO crystal oscillator model
features an operating temperature range of -40°C to +85°C and a storage
temperature range of -55°C to +125°C. At 12 kHz to 20 MHz, typical phase
jitter is 0.75 pS RMS for the 125.00 MHz model, 0.77 pS RMS for 156.25 MHz
and 0.86 pS RMS for 312.50 MHz. Start up time is 10 mS. The new XpressO
oscillators feature gold over nickel termination finish.
For more information,
please visit
http://foxonline.com/xpresso_assp.htm
or contact Customer Service, Fox Electronics, 5570 Enterprise Parkway, Fort
Myers, Fla. 33905. Tel: 888-GET-2-FOX; Fax: 239-693-1554; E-mail:
http://www.foxonline.com/email.htm;
Web: www.foxonline.com. For an electronic copy, please visit http://www.simongroup.com/PressRoom/WordDocs/fox/FOX-A-3740.doc
For high res photo,
please visit
http://www.simongroup.com/PressRoom/Images/fox/FOX-A-3740.jpg
For additional news releases from Fox Electronics, please visit http://www.simongroup.com/PressRoom/fox.php
Subscribe to Fox's RSS feed:
http://feeds.feedburner.com/FoxElectronics
Follow us on Twitter:
http://twitter.com/foxelectronics1
Fort Myers, Fla. June 1st, 2010
Fox Electronics is pleased to announce the appointment of Mr. Paul Rodger as
Director of Sales and Marketing Fox Electronics EMEA effective June the 1st
2010. Paul comes to Fox Electronics with more than 20 years of sales and
marketing experience in the Semiconductor EMEA marketplace including
experience as a Product Manager for several leading Semiconductor
organizations.
 Paul
will be available at the Fox EMEA office on June the 15th. His direct dial
office number is +44.1283.568153 and his mobile number is +44.7786.516052.
To reach Paul by regular mail correspondence the Fox Electronics EMEA
address is as follows: 9 Alderson Drive, Stretton, Burton Upon Trent.
Staffs. DE13 0QQ. UK.
Paul and the rest of the Fox team are here to support your efforts and we
kindly thank you for your support. Please join me in welcoming Paul to the
Fox team and call upon him for all your needs.
 Fort
Myers, Fla. January 11, 2010 -
Fox Electronics, a leading global supplier of frequency control solutions,
recently released the new compact 3.3-volt
F32K
32.768 kHz oscillator series as an expansion to its HCMOS oscillator
offerings. The F32K oscillators draw a mere 1.5 µA of current and 250 nA of
standby current, making them ideal for a wide variety of applications
including real time clocks (RTCs), microcontroller sub clocks, sleep mode
clocks and watchdog timer clocks.
The new HCMOS oscillators come in a small 3.2 mm x 2.5 mm package and offer
stabilities of +10 ppm to -90 ppm across a temperature range of -10°C to
+70°C and +10 ppm to -140 ppm across -40°C to +85°C.
Fox's new RoHS-compliant SMD oscillators feature a usable supply voltage of
1.5 volts to 5.5 volts (3.3 volts ±10% standard). Operating temperature is
-40°C to +85°C and storage temperature is -55°C to 125°C. At 25°C, frequency
tolerance is +5 ±20 ppm. The HCMOS oscillators feature a gold termination
finish.
Pricing for a F32K-327 oscillator is $1.31 in quantities of 50,000. Delivery
is eight weeks ARO.
For more information, please visit http://www.foxonline.com/pdfs/F32K.pdf or
contact Customer Service, Fox Electronics, 5570 Enterprise Parkway, Fort
Myers, Fla. 33905. Tel: 888-GET-2-FOX; Fax: 239-693-1554; E-mail:
http://www.foxonline.com/email.htm ; Web:
www.foxonline.com
.
For an electronic copy, please visit
http://www.simongroup.com/PressRoom/WordDocs/fox/FOX-A-3710.doc
For high res photo, please visit
http://www.simongroup.com/PressRoom/Images/fox/FOX-A-3710.jpg
For additional news releases from Fox Electronics, please visit
http://www.simongroup.com/PressRoom/fox.php
Subscribe to Fox's RSS feed:
http://www.simongroup.com/PressRoom/feeds/Fox_Electronics.xml
READER SERVICE INQUIRIES: Please forward all reader service inquiries to
Customer Service, Fox Electronics, 5570 Enterprise Parkway, Fort Myers, Fla.
33905.
EDITOR'S NOTE: Fox Electronics is a leading global supplier of standard and
custom frequency control products, including the industry's broadest line of
crystals, oscillators, VCXOs, TCXOs, OCXOs and crystal filters. The company,
headquartered in Fort Myers, Fla., has facilities, representatives and
distributors throughout the world.
 Fort
Myers, Fla. December 14, 2009 - Fox Electronics, a leading global
supplier of frequency control solutions, recently released the
FXO-LC32 series LVDS oscillators as an expansion of the XpressO
XO LVDS oscillators line. The new 2.5-volt XpressO crystal oscillators come
in a reduced 3.2 mm x 2.5 mm package with stabilities as tight as ±25 ppm
and feature industry-standard packaging, including footprint and pin-out.
The new XpressO oscillators come in a frequency range of 0.75 MHz through
1.0 GHz and offer frequency resolution to six decimal places. FXO-LC32
oscillators utilize a family of proprietary application specific integrated
circuits (ASICs) designed and developed by Fox to significantly reduce
noise.
Offering a breakthrough in configurable frequency control solutions, Fox's
new 2.5-volt LVDS oscillators have reduced noise levels via the third order
Delta Sigma Modulator (DSM) comparable to those of traditional bulk quartz
and SAW oscillators. They also offer extremely low jitter of less than 1 pS.
With an operating temperature range of -20°C to +70°C or -40°C to +85°C, the
fully RoHS and REACH compliant XpressO XO LVDS oscillators are ideal for a
broad range of applications requiring an oscillator, including SONET,
Ethernet, storage area network, fiber channel, test and measurement
equipment, industrial controllers, microprocessors/DSP/FPGA, broadband
access and others. The low cost oscillators are available in 1 to 2 days for
samples and within 10 days for production quantities.
To reduce power consumption, the 2.5-volt FXO-LC32 oscillators offer a
tri-state enable/disable feature that allows the user to turn off the
output. The oscillator contacts are constructed with gold over nickel
finish. Fox's patented serial identification system provides comprehensive
traceability back to its original manufacturing lot to ensure quality
control.
Pricing for FXO-LC325-312.5MHz XpressO oscillators is $5.27 in quantities of
10,000 pieces. Delivery for production quantities is 10 days ARO.
For more information, please visit http://www.foxonline.com/pdfs/FXO_LC32.pdf
or contact Customer Service, Fox Electronics, 5570 Enterprise Parkway, Fort
Myers, Fla. 33905. Tel: 888-GET-2-FOX; Fax: 239-693-1554; E-mail: http://www.foxonline.com/email.htm;
Web: www.foxonline.com.
For an electronic copy, please visit http://www.simongroup.com/PressRoom/WordDocs/fox/FOX-A-3657.doc
For high res photo, please visit http://www.simongroup.com/PressRoom/Images/fox/FOX-A-3657.jpg
For additional news releases from Fox Electronics, please visit http://www.simongroup.com/PressRoom/fox.php
Subscribe to Fox's RSS feed: http://feeds.feedburner.com/FoxElectronics
 Fort
Myers, Fla. November 16, 2009 -
Fox Electronics, a leading global supplier of frequency control solutions,
has added a new smaller version of its 3.3-volt XpressO XO LVDS oscillators
to the expansive XpressO crystal oscillator series. The new
FXO-LC33 series LVDS oscillators come in a frequency range of
0.75 MHz through 1.35 GHz in a compact 3.2 mm x 2.5 mm package with
stabilities as tight as ± 25 ppm and a frequency resolution to six decimal
places.
Ideal for use in SONET, SDH, ATM, Ethernet, storage area network, broadband
access, microprocessors/DSP/FPGA, industrial controllers, test and
measurement equipment, fiber channel and any other application requiring an
oscillator, the FXO-LC33 oscillators operate in a temperature range of -20°C
to +70°C or -40°C to +85°C.
Fox's FXO-LC33 oscillators offer a breakthrough in configurable frequency
control solutions. Using the third order Delta Sigma Modulator (DSM), these
XpressO XO LVDS oscillators have reduced noise levels comparable to those of
traditional bulk quartz and SAW oscillators. Offering extremely low jitter
of less than 1 pS and a wide frequency range, the XpressO oscillators are
available in 1 to 2 days for samples and within 10 days for production
quantities.
The low cost XpressO crystal oscillators utilize a family of proprietary
application specific integrated circuits (ASICs), designed and developed by
Fox, to significantly reduce noise.
The new oscillators come standard with Fox's patented serial identification
system with comprehensive traceability back to its original manufacturing
lot to ensure quality control. The RoHS- and REACH-compliant XpressO XO LVDS
oscillator's contacts are constructed with a gold over nickel termination
finish.
Fox's FXO-LC33 series features industry-standard packaging including
footprint and pin-out. To reduce power consumption, the XpressO oscillators
also feature a tri-state enable/disable feature that enables the user to
turn off the output.
Pricing for the FXO-LC335-212.5MHz XpressO oscillators is $4.57 in
quantities of 10,000 pieces. Delivery for production quantities is 10 days.
For more information, please visit (http://www.foxonline.com/pdfs/FXO_LC33.pdf)
or contact Customer Service, Fox Electronics, 5570 Enterprise Parkway, Fort
Myers, Fla. 33905. Tel: 888-GET-2-FOX; Fax: 239-693-1554; E-mail: http://www.foxonline.com/email.htm;
Web: www.foxonline.com.
For an electronic copy, please visit
http://www.simongroup.com/PressRoom/WordDocs/fox/FOX-A-3656.doc
For high res photo, please visit
http://www.simongroup.com/PressRoom/Images/fox/FOX-A-3656.jpg
For additional news releases from Fox Electronics, please visit
http://www.simongroup.com/PressRoom/fox.php
Subscribe to Fox's RSS feed:
http://www.simongroup.com/PressRoom/feeds/Fox_Electronics.xml
 Fort
Myers, Fla. October 7, 2009 - Fox
Electronics, a leading global supplier of frequency
control solutions, now offers a new compact
oscillator series with a stability of up to ±0.5 ppm
across a wide operating temperature range of -30°C
to 85°C.
The new
FOX923-GP Series,
available as TCXOs (temperature-compensated crystal
oscillators) or VCTCXOs (voltage-controlled,
temperature compensated crystal oscillators), comes
in supply voltages from 1.8 V to 3.3 V. These
features, combined with a small footprint of only
3.2 mm x 2.5 mm and a height of only 1.2 mm, make
these RoHS-compliant ceramic SMD (surface mount
device) oscillators ideal for a number of GPS
applications, which require precision timing.
The oscillators offer a frequency range from 16 MHz
to 27 MHz, and are available as standard in a
variety if common GPS frequencies, such as 16.369
MHz, 23.104 MHz, and 26 MHz. Input current is 1.5 mA
in frequencies from 16 MHz to 23 MHz and 1.7 mA from
24 MHz to 27 MHz. Additional frequencies can be
requested by contacting Fox's technical support
center.
Stability over the supply voltage change is ±0.3
ppm and ±0.2 ppm over the load change. The clipped
SINE output waveform's peak-to-peak level is a
minimum of 0.8 V. Aging per year is only ±1 ppm.
For more information, please visit (
http://www.foxonline.com/pdfs/fox923gp.pdf
) or contact Customer Service, Fox
Electronics, 5570 Enterprise Parkway, Fort Myers,
Fla. 33905. Tel: 888-GET-2-FOX; Fax: 239-693-1554;
E-mail:
http://www.foxonline.com/email.htm ; Web:
www.foxonline.com .
http://www.simongroup.com/PressRoom/WordDocs/fox/FOX-A-3691.doc
For high res photo, please visit
http://www.simongroup.com/PressRoom/Images/fox/FOX-A-3691.jpg
For additional news releases from Fox Electronics,
please visit
http://www.simongroup.com/PressRoom/fox.php
Subscribe to Fox's RSS feed.
# # #
READER SERVICE INQUIRIES: Please forward all reader
service inquiries to Customer Service, Fox
Electronics, 5570 Enterprise Parkway, Fort Myers,
Fla. 33905.
EDITOR'S NOTE: Fox Electronics is a leading global
supplier of standard and custom frequency control
products, including the industry's broadest line of
crystals, oscillators, VCXOs, TCXOs, OCXOs and
crystal filters. The company, headquartered in Fort
Myers, Fla., has facilities, representatives and
distributors throughout the world.
|
|
 Fort
Myers, Fla. August 17, 2009 - Fox Electronics, a leading global supplier
of frequency control solutions, has expanded its XpressO oscillator series
to include a 2.5 V LVPECL VCXO version in a 5.0 mm x 3.2 mm package size,
one of the industry's smallest, with a frequency range from 0.75 MHz through
1.0 GHz.
The new
FVXO-PC52 oscillators
are ideal for use in SONET, 10GbE, Fibre Channel, wireless repeaters,
transponders, HDTV, FPGAs, data acquisition, and military communications.
The cost-effective Fox
XpressO oscillator series is a breakthrough in configurable frequency
control solutions. These oscillators and VCXOs utilize a family of
proprietary application specific integrated circuits (ASICs), designed and
developed by Fox, with a key focus on noise reduction technologies as well
as significantly lower levels of jitter.
The FVXO-PC52 oscillators
employ a third order Delta Sigma Modulator (DSM) to reduce noise to levels
comparable to traditional bulk quartz and SAW oscillators. The
state-of-the-art technology utilized in these oscillators enables the
optimum selection of the output type, input voltages and temperature
performance features.
The LVPECL VCXO versions
offer shorter lead times and are guaranteed to be shipped within 24 hours
for samples and within 10 days maximum for production quantities.
The LVPECL VCXOs offer a
frequency resolution to six decimal places, an absolute pull range (APR) of
+50 ppm and operating temperatures of -20°C to +70°C or -40°C to +85°C.
These oscillators feature
miniature 5 mm x 3.2 mm packaging, including industry standard footprint and
pin-out; are fully RoHS compliant; have a tri-state enable/disable feature;
and are constructed with a gold over nickel termination finish. In
addition, this series offers Fox's patented serial identification system
with comprehensive traceability to ensure quality control. All finished
XpressO parts are 100% final tested.
Pricing for a FVXO-PC52B
XpressO VCXO Oscillator at 250 MHz in quantities of 1,000 is $3.16.
Delivery is next day for samples and 10 days for volume production.
For more information,
please visit
www.foxonline.com/pdfs/FVXO_PC52.pdf
or contact Customer Service, Fox Electronics, 5570 Enterprise Parkway, Fort
Myers, Fla. 33905. Tel: 888-GET-2-FOX; Fax: 239-693-1554; E-mail:
www.foxonline.com/email.htm;
Web:
www.foxonline.com.
For an electronic copy, please visit http://www.simongroup.com/PressRoom/WordDocs/fox/FOX-A-3663.doc
For high res photo, please visithttp://www.simongroup.com/PressRoom/Images/fox/FOX-A-3663.jpg
For additional news releases from Fox Electronics, please visit
http://www.simongroup.com/PressRoom/fox.php
READER SERVICE INQUIRIES:
Please forward all reader service inquiries to Customer Service, Fox
Electronics, 5570 Enterprise Parkway, Fort Myers, Fla. 33905.
EDITOR'S NOTE:
Fox Electronics is a
leading global supplier
of standard and custom frequency control products, including the industry's
broadest line of
crystals,
oscillators,
VCXOs,
TCXOs,
OCXOs and
crystal filters. The
company, headquartered in Fort Myers, Fla., has facilities,
representatives and distributors
throughout the world.
Fort
Myers, Fla. July 27, 2009 - Fox Electronics, a leading global supplier of
frequency control solutions, now offers its integrated SMD HCMOS
TCXOs and
VCTCXOs in a
miniature 3.2 mm x 2.5 mm package size. The new 3.3-volt
FOX923CH and FOX923CEH
Series oscillators eliminate the need for supplementary external circuitry
to obtain a HCMOS output.
Ideal for timing requirements
in applications such as radio frequency identification (RFID) readers,
utility metering, wireless telecommunications, GPS, data transfer and test
and measurement equipment, these new oscillators offer significantly tighter
stabilities than traditional oscillators. Stability is ±2.5 ppm over the
-30°C to +85°C operating temperature range, ±0.3 ppm over the 3.3-volt (±5%)
supply voltage and ±0.2 ppm over the 15 pF load change.
The series offers an input
current (IDD) of 6 mA, an output symmetry of 40% to 60% over a frequency
range of 9 MHz to 32 MHz and typical phase noise from -145 dBc/Hz at a 10
kHz offset to -85 dBc/Hz at a 10 Hz offset. Maximum reflow soldering
temperature is 260°C at 10 seconds.
These RoHS-compliant
oscillators have a gold termination finish and a maximum height of 1.2 mm.
The FOX923CH TCXOs (temperature-compensated crystal oscillators) feature a
no-connect on Pin 1, while the FOX923CEH VCTCXOs (voltage-controlled,
temperature-compensated crystal oscillators) include voltage control on Pin
1 to further tune out inaccuracies.
Pricing for a
FOX923CH-10.000MHz oscillator is $0.99 per unit in quantities of 10,000.
Delivery is eight weeks ARO.
For more information, please
visit
http://www.foxonline.com/pdfs/fox923CH.pdf
or contact Customer Service, Fox Electronics, 5570 Enterprise Parkway, Fort
Myers, Fla. 33905. Tel: 888-GET-2-FOX; Fax: 239-693-1554; E-mail:
http://www.foxonline.com/email.htm;
Web:
www.foxonline.com.
For an electronic copy,
please visit http://www.simongroup.com/PressRoom/WordDocs/fox/FOX-A-3683.doc
For high res photo, please visit
http://www.simongroup.com/PressRoom/Images/fox/FOX-A-3683.jpg
For additional news releases from Fox Electronics, please visit
http://www.simongroup.com/PressRoom/fox.php
READER SERVICE INQUIRIES: Please forward all reader service inquiries to
Customer Service, Fox Electronics, 5570 Enterprise Parkway, Fort Myers, Fla.
33905.
EDITOR'S NOTE:
Fox Electronics is a
leading global supplier
of standard and custom frequency control products, including the industry's
broadest line of
crystals,
oscillators,
VCXOs,
TCXOs,
OCXOs and
crystal filters. The
company, headquartered in Fort Myers, Fla., has facilities,
representatives and distributors
throughout the world.
 Fort
Myers, Fla. June 25th, 2009 -
Fox Electronics, a leading global supplier of frequency control solutions,
today announced two new series of ceramic
SMD (surface mount device) automotive-grade crystals built to operate at
extended temperature ranges and engineered to withstand higher levels of
shock and vibration. The new
FXA5032B and
FXA7050B crystals are used in a variety of automotive timing
applications, including GPS navigation, high-end audio and video systems,
wireless phones, collision warning systems, Antilock Brake System
controller, RADAR and onboard computer systems.
Fox's FXA5032B series features a 5 mm x 3 mm package with a frequency range
of 8 MHz to 150 MHz, while the larger 7 mm x 5 mm FXA7050B series offers a 6
MHz to 133 MHz frequency range.
Standard frequency stabilities for both series are ±50 ppm to ±100 ppm, with
operating temperatures ranging from -40°C to +85°C and -40°C to +125°C,
respectively and a 3 ppm aging per year. Additional tolerances and
stabilities are available upon request. In addition, both products meet
AEC-Q200, the Automotive Electronics Council Stress Test Qualification for
Passive Components, and feature a load capacitance of 10 pF, a drive level
of 100 Micro Watts and a maximum soldering temperature of 260°C per 10
seconds.
These RoHS-compliant auto-grade crystals have a gold termination finish and
are seam sealed. This hermetically sealed lid helps reduce foreign matter
and moisture from inside the package.
Pricing for a FXA5032B with an operating temperature range of -40°C to
+125°C is $0.39 each in quantities of 10,000. Delivery is 6-8 weeks ARO.
For more information, please visit
http://www.foxonline.com/pdfs/FXA5032B.pdf and
http://www.foxonline.com/pdfs/FXA7050B.pdf or contact Customer Service,
Fox Electronics, 5570 Enterprise Parkway, Fort Myers, Fla. 33905. Tel:
888-GET-2-FOX; Fax: 239-693-1554; E-mail:
www.foxonline.com/email.htm; Web:
www.foxonline.com.
For an electronic copy, please visit
http://www.simongroup.com/PressRoom/WordDocs/fox/FOX-A-3682.doc
For high res photo, please visit
http://www.simongroup.com/PressRoom/Images/fox/FOX-A-3682.jpg
For additional news releases from Fox Electronics, please visit
http://www.simongroup.com/PressRoom/fox.php
Fort
Myers, Fla. May 1st, 2009
- Fox Electronics, a leading global supplier of frequency control solutions,
has expanded its XpressO oscillator series to include a 2.5-volt LVDS VCXO
version with a frequency range of 0.75 MHz through 1.0 GHz in a miniature 5
mm x 3.2 mm package at the same price point as the larger 7 mm x 5 mm
package.
The new
FVXO-LC52
oscillators are ideal for use in data storage, fiber channel, wireless
repeaters, transponders, HDTV, FPGAs, data acquisition and military
communications.
The
revolutionary, configurable frequency XpressO oscillator series utilizes
application specific integrated circuits (ASICs) that have been designed and
developed by Fox, and concentrate on both noise reduction technologies as
well as significantly lower jitter levels.
The FVXO-LC52 oscillators use a third order Delta Sigma Modulator (DSM) to
reduce noise levels comparable to traditional bulk quartz and SAW
oscillators. The latest technology on the market is employed in these
oscillators, enabling optimal selection of the output type, input voltages
and temperature performance features.
Shorter lead times and a 1 to 2 day shipment of samples are standard with
the LVDS VCXO XpressO oscillators. In addition, production quantities are
shipped within 10 days.
The new oscillators offer a frequency resolution to six decimal places, an
absolute pull range (APR) of +50 ppm and operating temperatures of -20°C to
+70°C or -40°C to +85°C.
These RoHS-compliant oscillators feature a miniature 5 mm x 3.2 mm package
size with an industry standard footprint and pin-out, have a tri-state
enable/disable feature and are constructed with a gold over nickel
termination finish. In addition, this series incorporates Fox's patented
serial identification system with comprehensive traceability to ensure
quality control. All finished XpressO parts are 100% final tested.
Pricing for a FVXO-LC52B XpressO VCXO Oscillator at 212.5 MHz in quantities
of 1,000 is $3.16 per unit. Delivery is next day for samples and 10 days
for volume production.
For more information, please visit
www.foxonline.com/pdfs/FVXO_LC52.pdf or
contact Customer Service, Fox Electronics, 5570 Enterprise Parkway, Fort
Myers, Fla. 33905. Tel: 888-GET-2-FOX; Fax: 239-693-1554; E-mail:
www.foxonline.com/email.htm;
Web:
www.foxonline.com
.
http://www.simongroup.com/PressRoom/WordDocs/fox/FOX-A-3664.doc
For high res photo, please visit
http://www.simongroup.com/PressRoom/Images/fox/FOX-A-3664.jpg
For additional news releases from Fox Electronics, please visit www.simongroup.com/PressRoom/fox.php
Please forward all reader service inquiries to Customer Service, Fox
Electronics, 5570 Enterprise Parkway, Fort Myers, Fla. 33905.
 New
Compact
1-volt Oscillators from Fox Electronics Provide Exceptionally Low Current
Consumption across Full Frequency Range
Fort Myers, Fla.
March 2, 2009 -- Fox Electronics, a leading global supplier of
frequency control solutions, has expanded its line of small form factor,
low voltage oscillators with the 1-volt
F200 Series in a 2.5 mm x 2.0 mm package and a standby
function that reduces the oscillator's current consumption to five micro
amps for more efficient power usage.
The F200's extremely low current draw of
2.5 mA across the 1.8 MHz to 32 MHz frequency range and 3.5 mA from 32.1
MHz to 50.0 MHz makes the new oscillator series ideal for a wide range
of environments with minimal air circulation, such as compact consumer
electronics and weather-proof enclosures.
The new oscillators are also ideal for
numerous portable and battery powered devices. These include satellite
and terrestrial radio; WiMax, 802.11 and Bluetooth wireless; wired and
optical networks for voice, data and Internet as well as for automotive
and test equipment; remote sensing equipment; and GPS.
Stabilities of the F200 range from ±20
ppm to ±100 ppm across an operating temperature range of -10°C to +70°C
(+14°F to +158°F), with ±25 ppm through ±100 ppm stabilities available
across an extended temperature range of -40°C to +85°C (-40°F to
+185°F).
Pricing for an F200 series HCMOS
Oscillator Model F205-25 (1 V, 25 MHz, ±50 ppm, 2.5 mm x2.0 mm) starts
at $1.59 per piece in quantities of 10,000 on a standard tape and reel
assembly. Delivery is eight weeks ARO.
For more information, please visit
http://www.foxonline.com/pdfs/F200.pdf or
contact Customer Service, Fox Electronics, 5570 Enterprise Parkway, Fort
Myers, Fla. 33905. Tel: 888-GET-2-FOX; Fax: 239-693-1554; E-mail:
www.foxonline.com/email.htm;
Web:
www.foxonline.com.
For an electronic copy, please visit
www.simongroup.com/PressRoom/WordDocs/fox/FOX-A-3600.doc For
high res photo, please visit
www.simongroup.com/PressRoom/Images/fox/FOX-A-3600.jpg.
For additional news releases from Fox Electronics, please visit www.simongroup.com/PressRoom/fox.php
READER SERVICE INQUIRIES: Please
forward all reader service inquiries to Customer Service, Fox
Electronics, 5570 Enterprise Parkway, Fort Myers, Fla. 33905.
EDITOR'S NOTE: Fox Electronics is a
leading global supplier of standard and custom frequency control
products, including the industry's broadest line of crystals,
oscillators, VCXOs, TCXOs, OCXOs and crystal filters. The company,
headquartered in Fort Myers,
Fla., has facilities, representatives and distributors throughout the
world.
New Fox
Electronics 2.5 V XpressO VCXOs Now Available In LVPECL Versions with 7 mm x
5 mm Package and Increased Frequency Range
Fort Myers, Fla. January 12, 2009
-
Fox Electronics, a leading global supplier of frequency
control solutions, has expanded its
XpressO oscillator series to include a 2.5-volt LVPECL VCXO
version with an industry standard 7 mm x 5 mm package size and a frequency
range from 0.75 MHz through 1.0 GHz.
The new
FVXO-PC72 oscillators are ideal for use in
any application requiring an oscillator, including SONET, Ethernet, storage
area network, broadband access, microprocessors, DSPs, FPGAs, industrial
controllers, test and measurement equipment and fiber channel applications.
The cost-effective Fox XpressO oscillator series is a breakthrough in
configurable frequency control solutions. These oscillators and VCXOs
utilize a family of proprietary application specific integrated circuits
(ASICs), designed and developed by Fox, with a key focus on noise reduction
technologies as well as significantly lower levels of jitter.
The FVXO-PC72 oscillators employ a third order Delta Sigma Modulator (DSM)
to reduce noise to levels comparable to traditional bulk quartz and SAW
oscillators. The state-of-the-art technology utilized in these oscillators
enables the optimum selection of the output type, input voltages and
temperature performance features.
The LVPECL VCXO versions offer shorter lead times and are guaranteed to be
shipped within 24 hours for samples and within 10 days maximum for
production quantities.
The LVPECL VCXOs offer a frequency resolution to six decimal places, an
absolute pull range (APR) of +50 ppm and operating temperatures of -20°C to
+70°C or -40°C to +85°C.
These oscillators feature industry standard 7 mm x 5 mm packaging, including
footprint and pin-out; are fully RoHS compliant; have a tri-state
enable/disable feature; and are constructed with a gold over nickel
termination finish. In addition, this series offers Fox's patented serial
identification system with comprehensive traceability to ensure quality
control. All finished XpressO parts are 100% final tested.
Pricing for a FVXO-PC72B XpressO VCXO Oscillator at 644.5313MHz in
quantities of 1,000 is $6.73. Delivery is next day for samples and 10 days
for volume production.
For more information, please visit www.foxonline.com/pdfs/FVXO_PC72.pdf or
contact Customer Service, Fox Electronics, 5570 Enterprise Parkway, Fort
Myers, Fla. 33905. Tel: 888-GET-2-FOX; Fax: 239-693-1554; E-mail:
www.foxonline.com/email.htm; Web: www.foxonline.com.
For an electronic copy, please visit www.simongroup.com/PressRoom/WordDocs/fox/FOX-A-3661.doc
For high res photo, please visit www.simongroup.com/PressRoom/Images/fox/FOX-A-3661.jpg
For additional news releases from Fox Electronics, please visit
www.simongroup.com/PressRoom/fox.html
READER SERVICE INQUIRIES: Please forward all reader service inquiries to
Customer Service, Fox Electronics, 5570 Enterprise Parkway, Fort Myers, Fla.
33905.
EDITOR'S NOTE: Fox Electronics is a leading global supplier of standard and
custom frequency control products, including the industry's broadest line of
crystals, oscillators, VCXOs, TCXOs, OCXOs and crystal filters. The company,
headquartered in Fort Myers, Fla., has facilities, representatives and
distributors throughout the world.
 New
1.8 V HCMOS Oscillator Features Low Heat Signature and Compact Footprint For
Use in Mobile Products
Fort
Myers, Fla. December 9, 2008
- Fox Electronics, a leading global supplier of frequency control solutions,
now offers a 1.8 V HCMOS oscillator that combines an extremely small
footprint with exceptionally low heat generation and current consumption.
The RoHS-compliant
F210
series is only 2.5 mm x 2.0 mm with an input current of only 2.5 mA to 5.0
mA across the entire 0.75 MHz to 50.00 MHz frequency range.
The new
F210
oscillator series is ideal for environments with minimal air circulation,
such as compact consumer electronics and weather-proof enclosures. They are
also used in a wide range of other portable and battery powered devices
including satellite and terrestrial radio; WiMax, 802.11 and Bluetooth
wireless; wired and optical networks for voice, data and Internet as well as
for automotive and test equipment; remote sensing equipment; and GPS.
The oscillators feature a standby function that reduces current consumption
to 10 micro amps for more efficient power usage and offer stabilities from
±25 ppm to ±100 ppm across an operating temperature range of -10°C to +70°C
(+14°F to +158°F), with ±50 ppm and ±100 ppm stabilities available across an
extended range of -40°C to +85°C (-40°F to +185°F).
Pricing for an F210 series HCMOS oscillator (25 MHz, ±50 ppm F215 model)
starts at $0.99 per piece in quantities of 10,000, on a standard tape and
reel assembly. Delivery is 8 weeks ARO.
For more information, please visit (http://www.foxonline.com/pdfs/F210.pdf)
or contact Customer Service, Fox Electronics,
5570 Enterprise Parkway, Fort Myers, Fla. 33905. Tel: 888-GET-2-FOX; Fax:
239-693-1554; E-mail:
www.foxonline.com/email.htm;
For an electronic copy, please visit
www.simongroup.com/PressRoom/WordDocs/fox/FOX-A-3667.doc
For high res photo, please visit
www.simongroup.com/PressRoom/Images/fox/FOX-A-3667.jpg
For additional news releases from Fox Electronics, please visit
www.simongroup.com/PressRoom/fox.html
READER SERVICE INQUIRIES: Please forward all reader service inquiries to
Customer Service, Fox Electronics, 5570 Enterprise Parkway, Fort Myers, Fla.
33905.
EDITOR'S NOTE: Fox Electronics is a leading global supplier of standard and
custom frequency control products, including the industry's broadest line of
crystals, oscillators, VCXOs, TCXOs, OCXOs and crystal filters. The
company, headquartered in Fort Myers, Fla., has facilities, representatives
and distributors throughout the world.
 Fox
Electronics Provides Rapid Delivery of New Low-cost Miniature XpressO
Oscillators in Any Frequency from 0.75 to 250 MHz
Fort Myers, Fla. September 29, 2008 - Fox Electronics, a leading
global supplier of frequency control solutions, has introduced its new,
exceptionally low cost, 3.2 mm x 2.5 mm HCMOS
XpressO oscillators, which can be shipped in 10 days or less for
production quantities and next day for samples, in any frequency from 0.75
MHz to 250 MHz.
With a uniquely wide frequency range as well as an industry standard
footprint and pin-out, the new 3.3 V XpressO oscillators are ideal for a
variety of applications that require low jitter in an exceptionally compact,
cost-effective package. These include microprocessor, DSP, FPGA, SONET and
Ethernet environments as well as industrial controllers, test and
measurement equipment and storage area networks.
The RoHS-compliant oscillators are available in ±50 ppm and ±100 ppm
stabilities with an operating temperature of -20°C to +70°C (-4°F to +158°F)
and feature a gold over nickel termination finish.
Application specific integrated circuits (ASICs) incorporated into the
oscillators enable accurate performance, decreased cost and increased
flexibility. In addition, the XpressO oscillators offer noise levels
comparable to bulk quartz and SAW oscillators by employing proprietary third
order DSM noise reducing technology and a low noise architecture.
As with all XpressO oscillators, the new series features Fox's exclusive
internal Serial ID for exceptional quality control and unique traceability
of each individual part throughout the entire manufacturing process.
Pricing for a 3.2 x 2.5 mm 27 MHz 100 ppm XpressO (FXO-HC330 27.000) in
quantities of 10,000 is $0.47 per unit. Delivery is 1 to 2 days for samples
and 10 working days for production quantities.
For more information, please visit
www.foxonline.com or contact Customer
Service, Fox Electronics, 5570 Enterprise Parkway, Fort Myers, Fla. 33905.
Tel: 888-GET-2-FOX; Fax: 239-693-1554; E-mail:
www.foxonline.com/email.htm ; Web: www.foxonline.com.
For an electronic copy, please visit
http://www.simongroup.com/PressRoom/WordDocs/fox/FOX-A-3607.doc
For high res photo, please visit
http://www.simongroup.com/PressRoom/Images/fox/FOX-A-3607.jpg
For additional news releases from Fox Electronics, please visit
http://www.simongroup.com/PressRoom/fox.html
READER SERVICE INQUIRIES: Please forward all reader service inquiries to
Customer Service, Fox Electronics, 5570 Enterprise Parkway, Fort Myers, Fla.
33905.
UPCOMING TRADESHOW: Electronica; Hall B6, Booth 360; Munich, Germany,
November 11-14, 2008
EDITOR'S NOTE: Fox Electronics is a leading global supplier of standard and
custom frequency control products, including the industry's broadest line of
crystals, oscillators, VCXOs, TCXOs, OCXOs and crystal filters. The company,
headquartered in Fort Myers, Fla., has facilities, representatives and
distributors throughout the world.
Fox
Electronics' 2.5-Volt
XpressO LVPECL and LVDS
Oscillators to Include 5 mm
x 3.2 mm Package Size
Fort Myers,
Fla. August 25, 2008
- Fox Electronics, a leading
global supplier of
frequency control
solutions, has expanded its
XpressO LVPECL and LVDS oscillator series to
include a 5 mm x 3.2 mm package size. The FXO-LC52 and FXO-PC52 oscillators
are ideal for use in SONET, Ethernet, storage area network, broadband
access, microprocessors/DSP/FPGA, industrial controllers, test and
measurement equipment, fiber channel and portable applications requiring low
power usage.
The oscillators feature 2.5-volt operation
and require up to 50% less current than traditional 3.3-volt models,
resulting in less current and heat generation. In addition, the oscillator
series feature significantly low levels of jitter and phase noise by
employing noise reducing DSM technology and low noise architecture.
The LVPECL and LVDS oscillators feature application specific integrated
circuits (ASICs) for accurate performance, decreased cost and increased
flexibility. Designed to benefit engineers and purchasing personnel alike,
these high-quality, low-cost oscillators offer short lead times and are
guaranteed to be shipped within 24 hours for samples and within 10 days
maximum for production quantities.
The LVPECL and LVDS oscillators offer a frequency range of 0.75 MHz to 1.0
GHz and stabilities as tight as
±20 ppm and operate at temperatures of -20°C
to +70°C or ±25 ppm for -40°C to +85°C.
The RoHS-compliant series is constructed of gold over nickel termination
finish and features industry-standard packaging including footprint and
pin-out. In addition, the series offers Fox's patented serial identification
system with comprehensive traceability to ensure quality control by tracing
any product back to its original manufacturing lot.
Pricing for a FXO-LC525, 312.5 MHz LVDS XpressO oscillator (50 ppm, -20°C to
+70°C) in quantities of 1000 is $5.21. Delivery is next day for
samples, 10 days for volume production.
For more information, please
visit
http://www.foxonline.com/pdfs/FXO_PC52.pdf,
http://www.foxonline.com/pdfs/FXO_LC52.pdf or contact
Customer Service, Fox Electronics, 5570 Enterprise Parkway, Fort Myers, Fla.
33905. Tel: 888-GET-2-FOX; Fax: 239-693-1554; E-mail:
www.foxonline.com/email.htm; Web:
www.foxonline.com.
For an electronic copy, please visit
http://www.simongroup.com/PressRoom/WordDocs/fox/FOX-A-3611.doc
For high res photo, please visit
http://www.simongroup.com/PressRoom/Images/fox/FOX-A-3611.jpg
For additional news releases from Fox
Electronics, please visit
http://www.simongroup.com/PressRoom/fox.html
READER
SERVICE INQUIRIES :
Please forward all reader service inquiries to Customer Service, Fox
Electronics, 5570 Enterprise Parkway, Fort Myers, Fla. 33905.
UPCOMING TRADESHOW:
Electronica, Munich, Germany,
November 11-14, 2008
 Fox
Electronic's 2.5-Volt HCMOS Oscillators Offers Stabilities As Low As 8 ppm
Fort Myers, Fla. August
11, 2008 - Fox Electronics, a leading global supplier of frequency
control solutions, now offers HCMOS oscillators with 2.5-volt operation and
tighter stability options of 15 ppm ( F547),
10 ppm (F549) and 8 ppm (F54S),
with phase noise of -140 dBc/Hz at a 10 kHz offset and a jitter period of 3
ps (RMS), making the series ideal for communication equipment, data transfer
and test and measurement equipment applications, where reduced current and
heat generation are required.
Ideal for customers needing tight stability oscillators, Fox's new F54
oscillator series features significantly tighter stability options compared
to traditional oscillator stabilities of 100 ppm to 20 ppm. Fox's new low
voltage oscillators also operate over a wide temperature range of -20°C to
+70°C or optional temperature range of -40°C to +85°C (R Version) and
feature a maximum soldering temperature of 260°C at 10 seconds.
The HCMOS version offers an input current (IDD) of 7 mA and an output
current (IOL) of 4 mA minimum. Output symmetry for the F54 series is 45% to
55% over a frequency range of 4 MHz to 54 MHz.
The RoHS-compliant series has a gold over nickel termination finish and
features industry standard packaging of 5.0 mm x 3.2 mm, including
footprint and pin-out. Fox's F540 series is packaged on tape and reel.
Pricing for a F54SR (8 ppm, -40°C to +85°C Version) is $1.69 in quantities
of 10K. Delivery is 8 weeks ARO.
For
more information, please visit
http://foxonline.com/pdfs/f547f549.pdf
or contact Customer Service, Fox Electronics, 5570 Enterprise Parkway, Fort
Myers, Fla. 33905. Tel: 888-GET-2-FOX; Fax: 239-693-1554; E-mail:
www.foxonline.com/email.htm; Web:
www.foxonline.com.
For an electronic copy,
please visit
http://www.simongroup.com/PressRoom/WordDocs/fox/FOX-A-3629.doc
For high res photo, please
visit
http://www.simongroup.com/PressRoom/Images/fox/FOX-A-3629.jpg
For additional news releases
from Fox Electronics, please visit
http://www.simongroup.com/PressRoom/fox.html
To view archived items click here.
|
